CCPNF - TAPPING CREAM
- MSDS: CCPNF
- Manufacturer: DOALL CO
- Product Name: TAPPING CREAM
- National Stock Number: 9150-00N031833
Product Identification
Product ID:TAPPING CREAM
MSDS Date:01/31/1993
FSC:9150
NIIN:00N031833
MSDS Number: CCPNF
Responsible Party
DES PLAINES, IL 60016
US
Emergency Phone: 800-535-5053
Info Phone: 708-803-7272
Cage: 18056
Contractor
Telephone: 847-803-7366
Cage: 18056
Ingredients
MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)
CAS: 64742-52-5
RTECS: PY8035001
Fraction By Weight: 19%
OSHA PEL N/K
ACGIH TLV: N/K
TALL OIL FATTY ACIDS
CAS: 62790-12-3
Fraction By Weight: 6%
OSHA PEL N/K
ACGIH TLV: N/K
SULFURIZED FATTY MATERIAL; (CHLORINATED FATTY ESTER)
CAS: 61790-49-6
Fraction By Weight: 3%
OSHA PEL N/K
ACGIH TLV: N/K
ETHANOL, 2,2',2''-NITRILOTRI-; (TRIETHANOLAMINE)
CAS: 102-71-6
RTECS: KL9275000
Fraction By Weight: 3%
OSHA PEL N/K
ACGIH TLV: N/K
ETHANOL, 2-BUTOXY-; (2-BUTOXY ETHANOL)
CAS: 111-76-2
RTECS: KJ8575000
Fraction By Weight: 2%
OSHA PEL 50 PPM, S
ACGIH TLV: 25 PPM, S
CELLULOSE, 2-HYDROXYETHYL ETHER; (HYDROXY ETHYL CELLULOSE)
CAS: 9004-62-0
RTECS: FJ5958000
Fraction By Weight: 1%
OSHA PEL N/K
ACGIH TLV: N/K
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 66%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: BREATHING
DIFFICULTY. EYE: MINOR IRRITATION. SKIN: DEFATTING, AND/OR MINOR
IRRITATION. SKIN ABSORPTION: NOT EXPECTED TO OCCUR. INGESTION:
NAUSEA AND/OR DIARRHEA. CHRONIC: ANIMAL STU DIES CLEARLY
DEMONSTRATED DOSE-RELATED ADVERSE EFFECTS ON THE CNS, HEMATOPOIETIC
TISSUE, BLOOD, (EFTS OF OVEREXPOSURE)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: KIDNEYS & LIVER, ASSOCIATED WITH THE
ADMINISTRATION OF ETHYLENE GLYCOL MONOBUTYL ETHER (EGBE) (EXTRACTED
FROM DHHS (NIOSH) PUBLICATION #90-118) .
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALATION: REMOVE PERSON TO FRESH AIR. IF NECESSARY, SUPPORT
BREATHING. GET MEDICAL ATTENTION. EYES: FLUSH WITH WATER FOR AT
LEAST 15 MINUTES. IF IRRITATION PERSISTS, GET MEDICAL ATTENTION.
SKIN: WAS H EXPOSED AREA WITH MILD SOAP AND WARM WATER ONLY. DO NOT
USE HARSH SOAP OR SOLVENT. SKIN ABSORPTION: GET MEDICAL ATTENTION.
INGESTION: KEEP PERSON WARM AND QUIET. GET MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:COC
Flash Point:360F,182C
Extinguishing Media:CARBON DIOXIDE, FOAM, OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER STREAM/SPRAY, TO COOL CONTRS TO PVNT VAP FORM & IGNIT, MAY
SPREAD FIRE. FOG NOZZ ARE PREF IF WATER USED.
Unusual Fire/Explosion Hazard:OXIDES OF CARBON AND SULFUR COMPOUNDS.
Accidental Release
Spill Release Procedures:USE ABSORBENT MATERIAL. DIKE AND PUMP INTO
DRUMS. MOP WITH SOAP AND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE DRY IN A CLOSED CONTAINER IN A
COOL PLACE AWAY FROM ANY FIRE SOURCE.
Other Precautions:AVOID BREATHING MIST.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:GENERAL MECHANICAL VENTILATION SHOULD BE ADEQUATE. IF
MISTING OCCURS, PROVIDE LOCAL VENTILATION.
Protective Gloves:NEOPRENE, IMPERMEABLE TO OIL GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:PRACTICE REASONABLE PERS HYGIENE. WASH EXPOSED
SKIN W/MILD SOAP & WARM WATER ONLY. OIL-SOAKED CLTHG SHOULD BE (SUP
DAT)
Supplemental Safety and Health
HYGIENE PRACT: CHANGED PROMPTLY & LAUNDERED BEFORE RE-WEARING.
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Spec Gravity:0.950 (H*2O=1)
pH:9.0
Solubility in Water:EMULSIFIES
Appearance and Odor:CREAMY-WHITE LIQUID, OILY ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES OF CARBON AND SULFUR COMPOUNDS.
Disposal
Waste Disposal Methods:TREAT AS AN OILY WASTE AND DISPOSE OF IN
ACCORDANCE WITH LOCAL, STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.